[Aavso-photometry] Batch Upload Help

[Aaron Price]

 That is the correct format. When you have JDs to 5 decimal places and
magnitudes to 3 decimal places the format runs together. But our
software can pull it out. Details on the AAVSO format is here:

http://www.aavso.org/observing/submit/official.shtml

Aaron

On 8/30/05, maurizio.martinengo at dmgtorino.it
<maurizio.martinengo at dmgtorino.it> wrote:
> Hello,
> 
> I have a time series photometry datas of AE Aqr to enter, but using batch
> upload and tab separated or space generic format I have this result:
> 
> Original file example:
> 
> 2453612.5365    11.29   0.023
> 2453612.5374    11.27   0.023
> 2453612.5383    11.26   0.023
> ...
> 
> Webobs result in "test" mode:
> 2035-01 AE AQR    2453612.5365011.290CCDV  1081       050923  MMG   Err:
> 0.023
> 2035-01 AE AQR    2453612.5374011.270CCDV  1081       050923  MMG   Err:
> 0.023
> 2035-01 AE AQR    2453612.5383011.260CCDV  1081       050923  MMG   Err:
> 0.023
> ...
> As you can see, JD ,Vmag and Code fields are not well separated.
> 
> Can someone help me ? I have 70 data points and I would like to avoid
> manual entering it.
> 
> Thanks,
> Maurizio
> _______________________________________________
> 
> Aavso-photometry mailing list
> Aavso-photometry at mira.aavso.org
> http://www.aavso.org/mailman/listinfo/aavso-photometry
> 


-- 
Aaron